Inter Dyne Systems

Specifying Custom Sizes

General Information

All stainless steel work surfaces and tables are 16 gauge type 304 stainless steel with a #4 satin finish unless otherwise specified. All back and side splashes come standard 4 inches high. Other heights available up on request. Tops ordered with sink bowls have a beaded edge. Each sink bowl is determined by the customers specification (single or double bowl).

Each table is mounted on 1 5/8″ stainless steel tubular legs with adjustable bullet feet. Cross rail bracing is welded on both ends. All sides are turned down 90 degrees for a flush fit. The underside of the top is reinforced with heavy steel channel and sound deadening material. The bottom shelf is 18 gauge steel with a #4 satin finish.

How to Order

The style and dimensional requirements are designated by following the steps shown below and filling in the boxes at the bottom that corresponds to the steps you go through.

Determine the overall dimension of your counter top (A x B). You may specify either dimension to 1/8 of an inch.

Select back splash and side splash from the examples to the left.

Select counter top edge. Either square edge (SE1) or marine edge (ME2).

(Optional, upon request, please call). Select sink style, size and position in counter top. Determine sink size (single or double bowl, width, and depth).

Select your installation method. If selecting to set your countertop on cabinets (CB5) we will ship tops flat. If selecting a table (TB5), table base will be sized to match top dimensions. If selecting to mount your countertop to the wall (WM5), the appropriate depth bracket will be shipped.

Scroll to Top